DS2Y的已经停产
Nominal coil voltage Pick-up voltage Drop-out voltage Nominal operating current [±10%] Coil resistance[±10%] Nominal operating power Max. allowable voltage (at 50°C 122°F)
1.5V DC 70%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) 132.7mA 11.3 ohm 200mW 200%V of nominal voltage
3V DC 66.7mA 45 ohm
5V DC 40.0mA 125 ohm
6V DC 33.3mA 180 ohm
9V DC 22.2mA 405 ohm
12V DC 16.7mA 720 ohm
24V DC 8.3mA 2,880 ohm
48V DC 6.3mA 7,680 ohm 300mW
返回首页
Specifications
Characteristics Item Specifications
Contact Arrangement 2 Form C
Initial contact resistance, max. Max. 50 m ohm (By voltage drop of 6V DC 1A)
Contact material Ag+Au clad
Rating Max. switching power (resistive load) 60 W, 62.5 VA
Max. switching voltage 220 V DC, 250 V AC
Max. switching current 2 A
Max. carrying current 3 A
Min. operating power Approx. 98mW (147mW: 48V)
Nominal operating power Approx. 200 mW (300mW: 48V)
Electrical characteristics Insulation resistance (Initial) Min. 100M ohm (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
Breakdown voltage (Initial) Between open contacts 750 Vrms for 1min. (Detection current: 10mA.)
Between contact sets 1,000 Vrms for 1min. (Detection current: 10mA.)
Between contact and coil 1,000 Vrms for 1min. (Detection current: 10mA.)
FCC surge breakdown voltage between contacts and coil 1,500V
Temperature rise (at 20 °C 68 °F) Max. 65 °C with nominal voltage across coil and at nominal switching capacity
Operate time [Set time] (at 20°C 68°F) Approx. 4 ms [approx.3 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
Release time [Reset time] (at 20°C 68°F) Approx. 3 ms [approx.3 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)(without diode)
Mechanical characteristics Shock resistance Functional Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
Destructive Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
Vibration resistance Functional 10 to 55 Hz at double amplitude 3.3 mm (Detection time: 10μs.)
Destructive 10 to 55 Hz at double amplitude of 5 mm
Expected life Mechanical Min. 108
Electrical Min. 5 × 105 (1A 30V DC) , Min. 105 (2A 30V DC),
Conditions Conditions for operation, transport and storage * Ambient temperature: –40°C to +70°C –40°F to +158°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed (at rated load) 60 cpm
Unit weight Approx. 4 g .14 oz
DS2E的资料
产品名称
型号 DS
AG202344
产品概要
特点 最大具有2A通断区域的小型有极继电器。
触点构成 2c
材料 Ag(Au clad)
触点动作 BBM
最大控制容量(电流) 2A
最大控制容量(电压) 30V DC
最小适用负载(参考值) 10microA 10mV DC
自保持型 Single side stable
线圈额定电压 12V DC
额定消耗功率 400mW
吸合电压 8.4VDC
释放电压 1.2VDC
置位电压 -
复位电压 -
机械寿命 1x10^8
电气寿命 5x10^5
耐电压(触点间) 1000Vrms
耐电压(触点-线圈间) 1500Vrms
使用环境温度 -40℃~+70℃
绝缘类型 -
保护构造 Sealed
端子形状 PCB, Thru-hole
选件 -
国外标准 UL/CSA
我有PDF文档,但无法给你,级别不够啊`````